Primary Logo and Wordmark

On this page:

Primary Logo Options

The primary university logo lockup consists of two elements: the biplane graphic and the stacked Wright State University wordmark.

The primary university logo and wordmarks are the official trademarks and primary symbols of Wright State University. They are not permitted to be altered or reproportioned in any way, except as specified in this manual. To maintain art integrity, they must be reproduced from original files.

The Wright State primary logo is based on the photograph “First Flight,” by John T. Daniels. Wright State University was named to honor aviation pioneers Orville and Wilbur Wright, who invented the world’s first successful airplane.

The Wright State primary logo is based on the photograph "First Flight," by John T. Daniels. Wright State University was named to honor aviation pioneers Orville and Wilbur Wright, who invented the world's first successful airplane in their Dayton bicycle shop.

 

 

 

Wright State primary logo - fullcolor   

The full-color logo should be used whenever possible. In certain situations, it is not possible to use this logo, so the following three options are acceptable for use in the specified situations.

Wright State primary logo - green

Use of the green logo is permitted when color is limited, or in situations where print quality may be unpredictable.

Wright State primary logo - white

The reversed logo is used when logo appears in white on a solid background, such as the green block demonstrated here. The logo can only appear in this format on a solid-color background.

Wright State primary logo - black

The one-color black logo is used in the case of single-color printing, or if print quality is unpredictable.


Wordmarks

The primary wordmark may be used whenever the primary university logo is not appropriate. Wordmarks appear only in green, reverse, or black. A gold wordmark may appear only on a green field and is available upon request.

The wordmark may be reversed out of a dark portion of a photograph as long as the words are completely legible.

The Wright State wordmark is made up of customized lettering, so do not attempt to typeset these words as a wordmark.

Wright State wordmark greenWright State wordmark whiteWright State wordmark black

Wright State 2-line wordmark greenWright State 2-line wordmark whiteWright State 2-line wordmark black

Limited use three-line wordmark

This limited-use wordmark is available primarily for social media applications, but may be used in situations of restricted space with prior approval from the Office of Marketing.

Wright State 3-line wordmark green

Wright State 3-line wordmark white

Wright State 3-line wordmark black


Using Marks

All university marks are registered trademarks and must be used in accordance with the guidelines outlined in the Brandbook. This includes secondary and tertiary marks, to which all these same rules apply.

All Wright State publications with an external audience and funded using university money should be designed and produced through the Office of Marketing and clearly identified as coming from Wright State University.

The primary corporate mark or the primary wordmark must appear prominently on all university publications, communications, and digital media*. In addition, the primary corporate mark should appear on the back of each publication and/or next to the return address of a mail piece. On mailing panels and envelopes, the return address should include the primary corporate mark in full color, unless color is not possible. When a mark is used in the return address, it is not necessary to include "Wright State University" with the address information.

*In social media, official channels may use the approved ‘W’ social media profile picture. Refer to the social media section of the Brandbook for more information.

Download the primary logo and wordmarks.

Clear Space

Maintaining clear space around the all marks ensures they remain legible. The clear space is to be free of photos, text, and graphic elements. An amount equal to the height of the ‘W’ must be maintained as clear space on all four sides of the mark. Use this guideline for all wordmarks, as well.

Wright State University primary logo - clear space around logo

Minimum Size

Wright State University primary logo - The height may not drop below .5 in.

may not drop below .5 in. high nor 1 in. wide

Wright State University wordmark  - The height may not drop below 2 in.

length may not drop below 2 in.

 

 

Cobranding

Permission must always be granted when cobranding. Please contact the Office of Marketing for further information.

Wright State University primary logo cobranding example - Permission must always be granted when cobranding.


Unacceptable Usage

We think we've seen it all, but are always surprised by some new alterations that show up. As a rule of thumb, if you change the logo at all, it is probably in violation, so talk to a branding contact before printing, airing, or posting.

All university marks are registered trademarks and must be used in accordance with the guidelines outlined in the Brandbook. This includes secondary and tertiary marks, to which all these same rules apply.

Wright State Violation - separating biplane and/or Wilber Wright figure

The biplane and/or Wilbur Wright figure may never be isolated from the logo.

Wright State Violation - distorted logo

The logo may never be distorted, such as this example of condensing.

Wright State Violation - unapproved colors

The logo may never appear in unapproved colors.

Wright State Violation - customizing logo

The logo may never be customized.

Wright State Violation - obscuring logo

Parts of marks and logos cannot be obscured.

Wright State Violation - all gold

Marks may not appear in gold, EXCEPT on solid green, such as when printed on a tablecloth.

Wright State Violation - patterns and backgrounds

Marks may not be placed on patterns or backgrounds that make them hard to read.

Wright State Violation - outline

Marks and logos may not be outlined.

Wright State Violation - resizing original elements

Original element proportions may not be changed.

Wright State Violation Apparel - WSU must be accompanied by Wright State University

On promotional items and apparel only, an exception is made for the use of the acronym "WSU" as long as "Wright State University" or "Wright State" is adjacent to "WSU." This clarifies that "WSU" is not referring to any other university with the same initials.


Logo Phaseout

The following logos and campaigns were used recently, but are now discontinued. Do not produce new materials using these assets.

Former Branding Assets

Wright State Violation - former branding assets

The former wordmark includes a serif on the 's' in "university". The 's' has been modified in the new version. The easiest way to spot the old biplane logo is by the word "UNIVERSITY," which is in italics.

Former Campaign Assets

Wright State Violation - former campaign assets